XAGENT
AGENT ID ONLY · BSC

XAGENT Whitepaper

The tier mint for Agent ID holders on BNB Chain Version 1.0 · November 2026

1. Project Overview and Mission

XAGENT is a tiered share mint on BNB Chain, open exclusively to holders of a .ai Agent ID. There is no presale, no private placement, and no team token allocation. Every XAGENT token in existence is created by one of two events: a participant minting shares through the sale contract, or the sale contract minting the pool side of a share. Nothing is distributed in advance to anyone.

The sale is built for the way this ecosystem actually operates. Participants act through their own AI agents and the Binance Agentic Wallet, so XAGENT has no wallet connect and no browser signing. A holder gives one instruction to their agent, the agent calls the sale contract inside the Agentic Wallet, and the holder approves the transaction preview in the Binance App. The mint page never touches a wallet.

Mission: to run the most verifiable mint in the Agent ID ecosystem. Every rule in this document is enforced by the sale contract, every number on the mint page is read from the chain, and the sale carries a full refund guarantee if its first tier fails (Section 7).

2. Key Features

Paid-first, no public free lane: Every participant enters by paying. Free shares exist only as invite rewards earned by paying members, and they are capped.

Agent ID verification: The sale contract checks the caller's Agent ID against the on-chain registry inside every mint. Wallets without a valid Agent ID cannot mint.

Per-ID quota: Each Agent ID may buy at most 10 shares during the entire sale, which spreads distribution and discourages bulk buying by whales and Sybil clusters.

Contract-enforced split: 90% of every payment is locked in the contract as the pool reserve. 10% goes to the project wallet. The split happens inside the mint transaction; there are no manual transfers to trust.

Permanent liquidity: When the pool opens, the reserve is paired with XAGENT and the LP tokens are burned in the same transaction. The liquidity can never be removed by anyone.

Refund guarantee: If tier 1 does not sell out within 30 days of the mint opening, every buyer can claim a full refund (Section 7).

Minimal admin surface: The project's only power over the sale is pausing and unpausing the mint. There is no function to withdraw the pool reserve, change prices, or alter quotas (Section 10).

3. Token Parameters, Allocation and Mechanisms

ParameterDetails
NetworkBNB Chain
Token name and symbolXAGENT
Hard cap444,000,000,000,000 (444 trillion), minted only as shares sell
Total sale shares4,440,000 shares across 353 tiers
Tier 110,000 shares at 1 USDT, fixed 50,000,000 XAGENT per share
PaymentUSDT (BSC)
Liquidity pairXAGENT/USDT on PancakeSwap V2
Reference opening price0.00000002 USDT per XAGENT
EligibilityHolders of a valid .ai Agent ID only
Base quota10 shares per Agent ID for the whole sale
Team allocationNone
Presale or private placementNone

Supply note: the hard cap is a ceiling, not a pre-mint. XAGENT is minted only when a share is sold (the buyer's amount plus the pool-side amount) or when an invite reward is claimed. If the sale stops early, the unminted remainder simply never exists.

Transfer Rules

XAGENT transfers are locked from the start of the sale until the liquidity pool opens. Tokens cannot be transferred or traded before that point.

Once the pool opens, wallet-to-wallet transfers are free of tax. Trading through the pair carries the taxes described in Section 4.

Minting Rules

Eligibility

Participants must hold a Binance Agentic Wallet with a .ai Agent ID registered on BNB Chain. The sale contract verifies the Agent ID on-chain (SPACE ID registry) during every mint call. A wallet whose address resolves to no Agent ID handle is rejected by the contract.

How to mint

  1. Open the mint page and choose the number of shares (1 to 10) and, on a first mint, the inviter's address if you were invited.
  2. Copy the generated instruction and give it to your own agent.
  3. Your agent approves USDT to the sale contract and calls the mint function inside your Binance Agentic Wallet.
  4. Review the preview in the Binance App: the USDT you pay, the tokens you receive, and the contract address. Approve it there.

Important: sending USDT directly to the sale contract does not mint anything. Tokens are issued only through the mint function. The sender is responsible for any funds sent by direct transfer.

Use of Minting Funds (100% of payments)

AllocationUse of funds
90%Held by the sale contract as the pool reserve. Before the pool opens it cannot move at all. At the tier 1 sellout it is paired into the liquidity pool (Section 3, Pool Launch). After the pool opens, the 90% of each later mint is added to the pool together with newly minted pool-side tokens at the live price, and the resulting LP tokens are burned.
10%Transferred automatically to the project wallet by the mint transaction. See Section 9 for sources, permitted uses, and the refund obligation attached to this share.

Tiered Minting Rules

Tier 1 is one large tier of 10,000 shares at 1 USDT per share, each paying a fixed 50,000,000 XAGENT. It is the only fixed-yield tier and the only tier that decides the pool launch and the refund deadline.

TiersShares per tierPrice per share (USDT)
110,0001.00
2 to 111,0001.10 rising to 2.00
12 to 911,0002.10 rising to 3.68
92 to 18110,0003.70 rising to 5.48
182 to 35320,0005.50 rising to the 8.07 cap

The exact price of every tier is computed by the contract and published as a full tier table on the mint page.

After the pool opens, the price per share stays on the same staircase, but the token amount per share floats with the live pool price. The amount is calculated from the pair's reserves at the moment of the mint, with a 1% mint bonus: a share delivers roughly 1% more tokens than the same USDT amount would buy directly on the pool at that moment, before the payment's own pool side is added.

When Minting Ends

Minting ends when all 4,440,000 shares have been sold, or automatically if issuance reaches the hard cap. There is no other end condition and no deadline on the later tiers: the sale runs until it sells out. The pre-pool phase is the exception, and it is governed by the refund rule in Section 7.

Initial Liquidity Pool Launch

Before tier 1 sells out, 90% of every minting payment accumulates inside the sale contract as the reserve, alongside the pool-side tokens minted with each share (45,000,000 XAGENT per tier 1 share).

The moment the 10,000th tier 1 share is sold, anyone may call the pool opening. The contract then:

  1. Takes the full reserve of 9,000 USDT and the full pool side of 450,000,000,000 XAGENT.
  2. Creates the XAGENT/USDT pair on PancakeSwap V2 (if it does not exist) and adds the liquidity at the fixed reference opening price of 0.00000002 USDT per token.
  3. Burns the LP tokens by sending them to the burn address (0x...dEaD) in the same flow.
  4. Unlocks token transfers and continues the tiered sale from tier 2.

No team action is required and no team action can substitute for it: the opening terms are constants in the contract.

4. Transaction Tax

After the pool opens, trades through the pair are taxed in XAGENT. Wallet-to-wallet transfers are never taxed.

Sells: 2%. Collected in XAGENT on every sell to the pair.

Buys: 1%. Collected in XAGENT on every buy from the pair and sent to the project wallet.

No other taxes exist. The tax logic is part of the token contract and cannot be changed after deployment.

5. Liquidity

All liquidity is created by the sale contract from real mint payments: the initial pool at the tier 1 sellout, and a top-up inside every later mint (the payment's 90% plus freshly minted pool-side tokens at the live price). Every LP token produced is burned immediately. There is no withdrawal channel for liquidity at any stage, for any account, including the project. The project team cannot remove, redirect, or borrow against the pool.

6. Invites

A buyer who holds at least one paid share may invite others by sharing their referral link or address. When an invited agent makes their first paid mint and names the inviter in the mint call, the contract verifies on-chain that the inviter is a paid holder and that this is the buyer's first mint, and credits the inviter 1 free share at the current tier's terms. The credit can be claimed at any time with a separate claim call.

Example: an inviter whose link brings in 12 first-time buyers earns exactly 10 free shares. At tier 1 terms, those 10 free shares equal 500,000,000 XAGENT, the same amount as a full 10-share paid position.

7. The Refund Rule

The sale carries a guarantee that is rare in this ecosystem: if tier 1 (10,000 shares) has not sold out within 30 days of the mint opening, the sale is considered failed and refunds open for every buyer.

Worked example: suppose 2,500 tier 1 shares sell (2,500 USDT paid) and the other 7,500 never sell. The contract holds 2,250 USDT; the project received 250 USDT. At day 30, refunds open. A buyer who paid 10 USDT can immediately claim 9 USDT (the escrowed 90%). Once the project returns its 250 USDT, the same buyer claims the remaining 1 USDT. Total recovered: 10 USDT, the full payment.

8. How the System Works

XAGENT uses the Agent ID as its access credential and the share as its unit of distribution. Payments split by contract: 90% builds permanently burned liquidity, 10% funds the project. Tier 1 decides everything: sell out and the pool opens at a fixed, published price with the tiers continuing above it; fail to sell out in 30 days and every buyer is refunded in full. Invites reward the agents who bring in real buyers, with a hard cap that keeps the reward honest. After the pool opens, each mint still feeds the pool, sell taxes burn supply, and the staircase prices later entries higher than early ones. Identity gating, locked liquidity, a capped invite system, and a funded refund guarantee form one operating cycle, executed entirely by the contracts.

9. Project Wallet

Sources

The project wallet receives only two things, both sent automatically by the contracts: 10% of every minting payment in USDT, and the trade taxes described in Section 4 (1% of buys, 1% of sells, in XAGENT). There is no team token allocation and no other funding channel. All flows are public on-chain.

The refund obligation

If the sale fails under Section 7, the first obligation of the project wallet is to return the accumulated 10% of the failed sale's payments to the sale contract so refunds complete at 100%. This obligation has priority over every use below.

Permitted uses

10. Developer Permission Boundaries

The project team's powers are deliberately minimal and are fixed in the deployed code:

11. Contract Information (BNB Chain)

ContractAddress
XAGENT tokenPublished at launch
XAGENT salePublished at launch
Agent ID registry (SPACE ID)0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F
PancakeSwap V2 router0x10ED43C718714eb63d5aA57B78B54704E256024E
PancakeSwap V2 factory0xcA143Ce32Fe78f1f7019d7d551a6402fC5350c73
USDT (BSC)0x55d398326f99059fF775485246999027B3197955

Both project contracts are published with fully verified source code (Sourcify exact match) before minting opens, and minting starts paused for exactly that reason. Verify addresses from the official channels in Section 13 before interacting; copies of the mint page exist in every launch.

12. Risks

XAGENT is a high-risk, speculative token. Prices after the pool opens are set by the market and can fall to zero. Tier yields decline as prices climb, and a share bought late can be worth less than its price within minutes of purchase. The refund rule covers only the pre-pool phase described in Section 7 and only pays from funds the contract holds plus the project's top-up obligation; it is not insurance and does not cover market losses after the pool opens. Smart contracts can contain undiscovered defects despite testing and public source verification. Nothing in this document is financial advice.

13. Official Channels